General Engineer (Direct Hire)

Job Description:

The Engineer position resides within the NextGen Organization, Portfolio Management & Technology Development Office (ANG-C), NAS Lifecycle Planning Division, (ANG-C7).

Duties

Performs multiple, varying, and complex assignments and plans the implementation of projects/programs under limited direction of a manager, project/program manager, or more experienced engineer. May act as a contributing specialist on large work activities or as a team leader for single or small work activities. Applies experience and advanced knowledge of engineering principles, theories, and concepts applicable to his/her discipline to accomplish assignments and to develop plans and techniques to improve programs and policies.

Considers the objectives of the major subdivision and LOB/SO when developing, integrating, and implementing solutions to diverse, complex problems. Provides guidance to lower-level staff to solve difficult technical issues. Typical assignments may include: system design and integration; extensive research; and shared responsibility for project/program management.

Supports team leads that provide portfolio plans and performance reports to communicate resource allocation and support agency NextGen decision-making. Defines, plans, and organizes assigned resources to accomplish organizational objectives. Resolves all but unique technical problems without the intervention of management or a more experienced engineer. Identifies and informs management of problems that require their attention. Often develops and recommends techniques to address problem situations.

Engages within and across the Portfolio Management and Technology Office and across a wide range of FAA organizations to ensure the "system of systems: integration and cross-agency program planning and execution required to successfully implement the operational improvements in various portfolios. Other responsibilities include activities required to support the development of standards and policies necessary to implement the elements of the FAAs NextGen Portfolio. Identifies, retrieves and analyzes data required to support decision-making at higher levels.

Contacts are internal and external. May act as a key technical point of contact for assigned activities. Contributes to the preparation of management/technical reports or contractual documents and may be called upon to communicate the overall results of a project or work activity to FAA management, the aviation and aerospace industries, and other external parties. Identifies portfolio gaps and facilitates timely resolution of issues, as well as providing assistance and support of materials needed to prepare and deliver reports.

Established policies/procedures provide guidance for most assignments but allow considerable discretion to select the most appropriate approach or to recommend new approaches. Assignments typically require solutions that are to be derived by interpreting and extrapolating from situations that were faced in the past. Provides recommendations to improve work processes.

Work is reviewed periodically, typically at major milestones and at completion, for technical compliance and alignment with the requirements of the projects and other work activities.

Job Requirements:

Requirements Conditions of Employment

US Citizenship is required.
Selective Service Registration is required for males born after 12/31/1959.
This position has a positive education requirement. Transcript(s) required.

Qualifications

To view the complete OPM qualification standard for the Group Coverage Qualification Standard for General Engineering Series 0801, please refer to: General Engineering Series 0801

Basic Requirement:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

To qualify for this position, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-H, FG/GS 11/12. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.

Specialized experience includes: Experience applying engineering concepts and processes by identifying, retrieving and analyzing information for system design and integration to support decision making to implement operational improvements in various portfolios.

Qualifications must be met by the closing date of this vacancy announcement.

Education

This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).

Failure to do so will result in loss of consideration.

Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation.

Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.

Required Documents

Notification of Personnel Action (SF-50).

Only supplemental documentation, e.g. transcripts or veteran's documentation will be accepted in combination with your on-line application. These documents must be uploaded or emailed to Danielle.C.Long@faa.gov on or before the closing date of this announcement. All submitted documents should reference the announcement number.

This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.

College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.

College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.

If selected, official transcripts are required prior to employment.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Job Ident #: 827577200

Company Details

Federal Aviation Administration

800 Independence Ave, SW
Washington, DC 20591 USA
www.faa.gov/jobs

Our continuing mission is to provide the safest, most efficient aerospace system in the world. We strive to reach the next level of safety, efficiency, environmental responsibility and global leadership. We are accountable to the American public and ...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Washington DC, District of Columbia, United States

Type

Contractor

Salary Range

$100,351 - $155,530

Company Details

Federal Aviation Administration

800 Independence Ave, SW
Washington, DC 20591 USA
www.faa.gov/jobs